LineageSettings.System

Whether to wake the screen with the app switch key, the value is boolean. 0 = 0ff, 1 = on

Whether to wake the screen with the assist key, the value is boolean. 0 = 0ff, 1 = on

Whether to wake the screen with the back key, the value is boolean. 0 = 0ff, 1 = on

Contains the battery light maximum brightness to use. Values range from 1 to 255

Contains the battery light maximum brightness to use when Do Not Disturb is active. Values range from 1 to 255

Whether the battery light should be enabled (if hardware supports it) The value is boolean (1 or 0).

What color to use for the battery LED while charging - full

What color to use for the battery LED while charging - low

What color to use for the battery LED while charging - medium

Whether the battery LED should repeatedly flash when the battery is low on charge. The value is boolean (1 or 0).

Current accent package name

Whether to use dark theme 0: automatic - based on wallpaper 1: time - based on LiveDisplay status 2: force light 3: force dark

Current application managing the style

If all file types can be accepted over Bluetooth OBEX. 0 = 0ff, 1 = on

Whether the button backlight is only lit when pressed (and not when screen is touched) The value is boolean (1 or 0).

Call recording format value 0: AMR_WB 1: MPEG_4 Default: 0

Whether to launch secure camera app when key is longpressed 0 = 0ff, 1 = on

Whether or not to send device back to sleep if Camera button is released ("Peek") 0 = 0ff, 1 = on

Whether to wake the screen with the camera key half-press. 0 = 0ff, 1 = on

The OpenCNAM paid account ID to be utilized by the Dialer

The OpenCNAM authentication token to be utilized by the Dialer

Use auto contrast optimization feature of display 0 = 0ff, 1 = on

Automatic outdoor mode 0 = 0ff, 1 = on

Use display power saving features such as CABC or CABL 0 = 0ff, 1 = on

Manual display color adjustments (RGB values as floats, separated by spaces)

Use color enhancement feature of display 0 = 0ff, 1 = on

This constant was deprecated in API level 8.
Use DISPLAY_CABC instead

The current custom picture adjustment values as a delimited string

Color temperature of the display during the day

Display color temperature adjustment mode, one of DAY (default), NIGHT, or AUTO.

Color temperature of the display at night

Enable statusbar double tap gesture on to put device to sleep 0 = 0ff, 1 = on

Enable looking up of phone numbers of nearby places 0 = 0ff, 1 = on

Enable looking up of phone numbers of people 0 = 0ff, 1 = on

Enable looking up of information of phone numbers not in the contacts 0 = 0ff, 1 = on

The forward lookup provider to be utilized by the Dialer

Whether or not to launch default music player when headset is connected

Whether the HighTouchSensitivity is activated or not. 0 = off, 1 = on

Whether to wake the screen with the home key, the value is boolean. 0 = 0ff, 1 = on

Whether the phone ringtone should be played in an increasing manner 0 = 0ff, 1 = on

Ramp up time (seconds) for increasing ring

Start volume fraction for increasing ring volume

Action to perform when the app switch key is pressed. (Default is 2) (See KEY_HOME_LONG_PRESS_ACTION for valid values)

Action to perform when the app switch key is long-pressed. (Default is 0) (See KEY_HOME_LONG_PRESS_ACTION for valid values)

Action to perform when the assistant (search) key is pressed. (Default is 3) (See KEY_HOME_LONG_PRESS_ACTION for valid values)

Action to perform when the assistant (search) key is long-pressed. (Default is 4) (See KEY_HOME_LONG_PRESS_ACTION for valid values)

Action to perform when the home key is double-tapped. (Default can be configured via config_doubleTapOnHomeBehavior) (See KEY_HOME_LONG_PRESS_ACTION for valid values)

Action to perform when the home key is long-pressed. (Default can be configured via config_longPressOnHomeBehavior) 0 - Nothing 1 - Menu 2 - App-switch 3 - Search 4 - Voice search 5 - In-app search 6 - Launch Camera 7 - Action Sleep 8 - Last app 9 - Toggle split screen 10 - Single hand (left) 11 - Single hand (right)

Action to perform when the menu key is pressed. (Default is 1) (See KEY_HOME_LONG_PRESS_ACTION for valid values)

Action to perform when the menu key is long-pressed. (Default is 0 on devices with a search key, 3 on devices without) (See KEY_HOME_LONG_PRESS_ACTION for valid values)

Whether to scramble a pin unlock layout 0 = 0ff, 1 = on

Whether keyguard will rotate to landscape mode 0 = false, 1 = true

Whether to wake the screen with the menu key, the value is boolean. 0 = 0ff, 1 = on

Whether navigation bar is placed on the left side in landscape mode 0 = 0ff, 1 = on

boolean value. toggles using arrow key locations on nav bar as left and right dpad keys

Navigation controls to Use

Contains the notifications light maximum brightness to use. Values range from 1 to 255

Contains the notifications light maximum brightness to use when Do Not Disturb is active. Values range from 1 to 255

What color to use for the missed call notification LED

How long to wait between flashes for the missed call notification LED

How long to flash the missed call notification LED

Whether to use the custom LED values for the notification pulse LED. 0 = 0ff, 1 = on

Which custom LED values to use for the notification pulse LED.

What color to use for the notification LED by default

How long to wait between flashes for the notification LED by default

How long to flash the notification LED by default

What color to use for the voicemail notification LED

How long to wait between flashes for the voicemail notification LED

How long to flash the voicemail notification LED

Whether to allow notifications with the screen on or DayDreams. The value is boolean (1 or 0). Default will always be false.

Whether to attach a queue to media notifications. 0 = 0ff, 1 = on

The people lookup provider to be utilized by the Dialer

Check the proximity sensor during wakeup 0 = 0ff, 1 = on

Whether to show the brightness slider in quick settings panel. 0 = 0ff, 1 = on

Show search bar in recents 0 = 0ff, 1 = on

The reverse lookup provider to be utilized by the Dialer

Whether to show the alarm clock icon in the status bar. 0 = 0ff, 1 = on

Display style of AM/PM next to clock in status bar 0: Normal display (Eclair stock) 1: Small display (Froyo stock) 2: No display (Gingerbread/ICS stock) default: 2

Display style of the status bar battery information 0: Display the battery an icon in portrait mode 2: Display the battery as a circle 4: Hide the battery status information 5: Display the battery an icon in landscape mode 6: Display the battery as plain text default: 0

Whether to control brightness from status bar 0 = 0ff, 1 = on

Whether to show the clock in the right or left position or show it in the center 0: show the clock in the right position (LTR) 1: show the clock in the center 2: show the clock in the left position (LTR) default: 0

Whether to show the IME switcher in the status bar 0 = 0ff, 1 = on

Show the pending notification counts as overlays on the status bar

Whether to allow one finger quick settings expansion on the side of the statusbar. 0 = 0ff, 1 = right, 2 = left

Status bar battery % 0: Hide the battery percentage 1: Display the battery percentage inside the icon 2: Display the battery percentage next to the icon

Boolean value on whether to show weather in the statusbar 0 = 0ff, 1 = on

Show icon when stylus is used The value is boolean (1 or 0).

Swap volume buttons when the screen is rotated 0 - Disabled 1 - Enabled (screen is rotated by 90 or 180 degrees: phone, hybrid) 2 - Enabled (screen is rotated by 180 or 270 degrees: tablet)

Whether to enable burnin protection 0 = 0ff, 1 = on

Whether to enable system profiles feature 0 = off, 1 = on

Locale for secondary overlay on dialer for t9 search input

Activate torchlight when power button is long-pressed while the display is off The value is boolean (1 or 0).

When the torch has been turned on by long press on power, automatically turn off after a configurable number of seconds. The value is an integer number of seconds in the range 0-3600. 0 means never automatically turn off.

Whether or not to vibrate when a touchscreen gesture is detected

Use EdgeGesture Service for system gestures in PhoneWindowManager 0 = 0ff, 1 = on

Whether or not volume button music controls should be enabled to seek media tracks 0 = 0ff, 1 = on

Volume Adjust Sounds Enable, This is the noise made when using volume hard buttons Defaults to 1 - sounds enabled

Whether to answer the call with the volume keys, the value is boolean. 0 = 0ff, 1 = on

Volume key controls ringtone or media sound stream

Whether to wake the screen with the volume keys, the value is boolean. 0 = 0ff, 1 = on

Whether the notification light will be allowed when in zen mode during downtime

Whether the notification light will be allowed when in zen priority mode during downtime

Convenience function for retrieving a single settings value as a floating point number. Note that internally setting values are always stored as strings; this function converts the string to an float for you. The default value will be returned if the setting is not defined or not a valid float.

Convenience function for retrieving a single system settings value as a float. Note that internally setting values are always stored as strings; this function converts the string to a float for you.

This version does not take a default value. If the setting has not been set, or the string value is not a number, it throws LineageSettings.LineageSettingNotFoundException.

Convenience function for retrieving a single settings value as an integer. Note that internally setting values are always stored as strings; this function converts the string to an integer for you.

This version does not take a default value. If the setting has not been set, or the string value is not a number, it throws LineageSettings.LineageSettingNotFoundException.

Convenience function for retrieving a single settings value as an integer. Note that internally setting values are always stored as strings; this function converts the string to an integer for you. The default value will be returned if the setting is not defined or not an integer.

Convenience function for retrieving a single settings value as a long. Note that internally setting values are always stored as strings; this function converts the string to a long for you.

This version does not take a default value. If the setting has not been set, or the string value is not a number, it throws LineageSettings.LineageSettingNotFoundException.

Convenience function for retrieving a single settings value as a long. Note that internally setting values are always stored as strings; this function converts the string to a long for you. The default value will be returned if the setting is not defined or not a long.

Look up a name in the database.

Construct the content URI for a particular name/value pair, useful for monitoring changes with a ContentObserver.

Convenience function for updating a single settings value as a floating point number. This will either create a new entry in the table if the given name does not exist, or modify the value of the existing row with that name. Note that internally setting values are always stored as strings, so this function converts the given value to a string before storing it.

Convenience function for updating a single settings value as an integer. This will either create a new entry in the table if the given name does not exist, or modify the value of the existing row with that name. Note that internally setting values are always stored as strings, so this function converts the given value to a string before storing it.

Convenience function for updating a single settings value as a long integer. This will either create a new entry in the table if the given name does not exist, or modify the value of the existing row with that name. Note that internally setting values are always stored as strings, so this function converts the given value to a string before storing it.

Store a name/value pair into the database.